Filter Cartridge (PPC) for IMT-RS8, IMT-NC9, IMT-NC9 R
H2O nanotec PPC filter cartridge – combined pre-filtration with activated carbon for the IMT-RS8, IMT-RS8 NANO, IMT-NC9 and IMT-NC9 R nanofiltration and reverse osmosis systems.
Main benefits of the PPC filter cartridge
- Mechanical pre-filtration and activated carbon in one cartridge
- Protects the NF or RO membrane from impurities and chlorine
- Fits the IMT-RS8, IMT-RS8 NANO, IMT-NC9 and IMT-NC9 R
- Recommended replacement interval 6–12 months
The PPC cartridge is the first filtration stage: mechanical pre-filtration captures sand, rust and other undissolved particles, and activated carbon removes chlorine and organic odours.
Technical highlights of the PPC cartridge
- Mechanical pre-filtration + activated carbon in one cartridge
- Compatible with 4 H2O nanotec units
- Replacement interval 6–12 months
| Category: | Filter Cartridges |
|---|---|
| Warranty: | 1 year |
| Weight: | 1.05 kg |
What is the PPC cartridge for?
The PPC cartridge is the first filtration stage in H2O nanotec units. It combines mechanical pre-filtration, which captures sand, rust and other undissolved particles, with activated carbon, which removes chlorine and organic odours. It thus protects the nanofiltration or reverse osmosis membrane behind it. The PPC cartridge does not replace the NF or RO membrane; these are replaced separately after 24–36 months.
Compatibility
The PPC cartridge fits these units:
- IMT-RS8 reverse osmosis,
- IMT-RS8 NANO nanofiltration,
- IMT-NC9 nanofiltration,
- IMT-NC9 R special reverse osmosis.
When and how to replace the cartridge
The recommended replacement interval is 6–12 months, and no later than after 12 months. With polluted water or higher consumption, replace the cartridge sooner. In the IMT-NC9 and IMT-RS8 NANO, the cartridge is replaced with a bayonet lock within a few seconds.
Consider replacing the cartridge if:
- the unit alerts you to a replacement,
- the recommended replacement interval has passed,
- the flow rate of filtered water has dropped significantly.
- Shut off the water supply to the unit.
- Open the filtered water tap to release the pressure.
- Replace the cartridge.
- Open the water supply again.
| Technical specifications | |
|---|---|
| Cartridge type | combined: mechanical pre-filtration + activated carbon |
| Compatibility | IMT-RS8, IMT-RS8 NANO, IMT-NC9, IMT-NC9 R |
| Recommended replacement interval | 6–12 months |
| Package contents |
|---|
| 🟢 Filter cartridge (PPC) |
⚠ NOTE: The PPC cartridge does not replace the NF or RO membrane. The membranes are replaced separately after 24–36 months.
FAQ
Everything you need to know about the PPC cartridge
Which units does the PPC cartridge fit?
The IMT-RS8, IMT-RS8 NANO, IMT-NC9 and IMT-NC9 R.
What does the PPC cartridge do?
It is the first filtration stage. Mechanical pre-filtration captures sand, rust and other undissolved particles, and activated carbon removes chlorine and organic odours. It thus protects the NF or RO membrane.
How often should the PPC cartridge be replaced?
Every 6–12 months, and no later than after 12 months. Sooner with polluted water or higher consumption.
How is the cartridge replaced?
Shut off the water supply to the unit, open the filtered water tap to release the pressure, replace the cartridge and open the water supply again. In the IMT-NC9 and IMT-RS8 NANO, the cartridge has a bayonet lock.
Does the PPC cartridge replace the NF or RO membrane?
No. The PPC cartridge only protects the membrane. The NF and RO membranes are replaced separately after 24–36 months.
Didn't find your answer? Ask us directly — we reply Mon–Thu 8 am–4 pm, Fri 8 am–2 pm (CET).
Product rating
Leave a rating
List of ratings
Discussion
Be the first who will post an article to this item!
