Home / DIY installation

DIY installation

DIY installation – we will help you remotely

Most of our under-sink filters can be installed by a capable DIYer in 15–30 minutes. We have prepared video guides, downloadable instructions and a checklist of what to prepare. And if you are not sure, send us a photo of the installation spot – we will be happy to advise.

Ask for installation advice Call H2O nanotec

 

 

Installation by our partner is available in the Czech Republic only. For whole-house equipment, we recommend a local plumber, who can follow the enclosed instructions.

What you can install yourself and what to leave to a plumber

Suitable for DIY

We recommend a plumber

What to prepare before installation

•Cold water connection – standard 3/8" or 1/2".
•For NC9, reverse osmosis and softeners: a drain and a power socket.
•Check the water pressure – if it is high, use IMT-M5, IMT-M8 or the high-pressure installation kit.
•Enough space under the sink or near the main water supply.
•For a separate filtered-water outlet, we recommend a three-way kitchen tap.
•Basic tools – spanners, sealing tape, a container for water.

Video guides

Installing the H2O nanotec V2 filter

Replacing the V2 filter cartridge

How we help you remotely

1

Send us an e-mail with the device name and a photo of where you want to install it.

2

We will advise you on placement, connection and any accessories you may need (pressure reducer, tap).

3

Install it yourself or with a local plumber, following the instructions and video.

Ask for installation advice Choose equipment in the e-shop

FREQUENTLY ASKED QUESTIONS
Everything about DIY installation

Do you offer installation in my country?

Installation by our partner is available in the Czech Republic only. Under-sink filters can be installed by yourself using the instructions and video; more complex equipment can be connected by any plumber.

Does the warranty apply if I install it myself?

Yes, the warranty applies if installation is carried out according to the instructions and applicable standards. We recommend taking photos of the installation – it helps in case of a complaint.

Can my own plumber install the device?

Yes. All devices use standard connections and the plumber can follow the enclosed instructions. If they have any questions, they can contact us directly.

How long does installation take?

The V2 filter takes about 15 minutes to connect; other under-sink systems usually take 1–2 hours. Whole-house equipment may take longer.

Not sure? Write to us

Send us a photo of the installation spot and the device name – we will advise on the connection and accessories.

info@h2onanotec.cz +420 602 320 980 Contact form

 

 

What are you looking for?

We recommend

Projekt EXPERTNÍ ANALÝZA V OBLASTI SORPČNÍCH MATERIÁLŮ NA BÁZI UHLÍKOVÝCH NANOTRUBIC, GRAFENU A JEHO DERIVÁTŮ je spolufinancován Evropskou unií.

Předmětem projektu je realizace experimentální studie zacílená na porovnání sorpčních vlastností pokročilých sorpčních materiálů na bázi uhlíkových nanotrubic, grafenu a jeho derivátů.

Ministerstvo