Installation Kit for High Water Pressure
H2O nanotec Installation Kit for High Water Pressure – an under-sink kit that reduces high water pressure to 0.3–0.35 MPa, suitable for the H2O nanotec V2 Filter.
Key benefits of the high-pressure installation kit
- Reduces pressure to 0.3–0.35 MPa (3–3.5 bar)
- Designed for the H2O nanotec V2 Filter
- Maximum flow 100 l/min
- Also protects your kitchen faucet
The kit is installed under the sink, so there is no need to modify the plumbing in your home. It suits any home where the water pressure is higher than the filter allows.
Technical highlights of the installation kit
- Outlet pressure 0.3–0.35 MPa
- Maximum flow 100 l/min
- Under-sink installation
| Category: | Accessories |
|---|---|
| Warranty: | 1 year |
| Weight: | 0.55 kg |
What is the high-pressure installation kit used for?
The H2O nanotec V2 Filter works at 0.1–0.4 MPa. If your mains pressure is higher, this kit reduces it to 0.3–0.35 MPa. It also protects your kitchen faucet.
The kit is intended for cases where the pressure exceeds 0.4 MPa and the IMT-M5 pressure regulator cannot be installed. To regulate pressure in the whole house, we recommend the IMT-M5 regulator with pre-filter.
Compatibility
The kit is designed for the H2O nanotec V2 Filter with legs.
Installing the kit
The kit is installed under the sink, so there is no need to modify the plumbing in your home. An installation video is available in the product documents.
| Technical specifications | |
|---|---|
| Outlet pressure | 0.3–0.35 MPa (3–3.5 bar) |
| Maximum flow | 100 l/min |
| Compatibility | H2O nanotec V2 Filter (with legs) |
| Weight | 550 g |
| Package contents |
|---|
| 🟢 Installation Kit for High Water Pressure |
FAQ
Everything you need to know about the high-pressure installation kit
How do I know if my pressure is too high?
A plumber or a pressure gauge on the supply can measure it. For the H2O nanotec V2 Filter it should not exceed 0.4 MPa (4 bar).
When should I choose the IMT-M5 instead?
When you want to reduce the pressure in the whole house, not just under the sink. Use the IMT-M5 pressure regulator.
What pressure does the kit reduce the water to?
To 0.3–0.35 MPa (3–3.5 bar), a value suitable for the H2O nanotec V2 Filter.
Where is the kit installed?
Under the sink, so there is no need to modify the plumbing in your home. An installation video is available in the product documents.
Didn't find your answer? Ask us directly — we reply Mon–Thu 8 am–4 pm, Fri 8 am–2 pm (CET).
Product rating
Leave a rating
List of ratings
Discussion
Be the first who will post an article to this item!
