Ultrafiltration
Ultrafiltration mechanically removes bacteria and viruses, sludge, algae and microplastics from water through a membrane with 0.01 µm pores. Minerals such as calcium and magnesium stay in the water. We offer under-sink units as well as units for the main water supply of the whole house, for both well water and mains water – most models work without electricity. Not sure which model to choose? Read our ultrafiltration buying guide below the product list.
Product sorting
List of products
Listing controls
How to choose an ultrafiltration unit
The choice depends mainly on where you want to filter the water and how much of it you use. An under-sink unit purifies water for drinking and cooking at the kitchen sink, while a whole-house unit on the main supply filters all the water in the building – in the kitchen, the bathroom and for your appliances. For well water, we recommend having it analysed first – we will be happy to help you evaluate the results.
Under-sink ultrafiltration
Under-sink units connect to your existing standard two-way tap, and filtered water flows from the regular spout. In addition to the 0.01 µm membrane, both have an activated carbon cartridge that reduces chlorine.
- IMT-D3 ultrafiltration unit – flow rate up to 10 l/min, works without electricity. Thanks to its higher flow rate, it can also serve as a whole-house solution for buildings with low consumption, typically a holiday cottage.
- IMT-D5 ultrafiltration unit – flow rate 5 l/min, touch display indicating cartridge wear, requires mains power.
Whole-house ultrafiltration
Whole-house units are installed on the main water supply (point of entry). They run on mains water pressure and flush captured impurities to the drain, so a drain is required at the installation site.
- IMT-U5 – flow rate 2 m³/h, for family houses with lower water consumption.
- IMT-U7 – flow rate 3 m³/h, for a typical family house or flat, works without electricity.
- IMT-U8 – flow rate 4 m³/h, for larger houses, guesthouses, businesses, swimming pools and hot tubs, works without electricity.
- IMT-U8 PSG – flow rate 4 m³/h, fully automatic unit with automatic flushing, water leak monitoring and app control, 230 V power supply.
Ultrafiltration for well water
Ultrafiltration is suitable for both well water and municipal mains water. For a well, we usually recommend:
- fitting an IMT-M5 pressure regulator with pre-filter or an IMT-M8 upstream of the unit to capture coarse impurities and extend membrane life,
- installing a bypass for easy maintenance,
- depending on the water analysis, adding an iron and manganese filter or a nitrate filter.
Read more in the article How to Remove Coliform Bacteria and E. coli from a Well.
Accessories and replacement cartridges
- IMT-P-W6 automatic flushing valve – regularly flushes the membrane of the IMT-U7 and IMT-U8 units on its own (the IMT-U8 PSG has built-in flushing).
- Replacement membranes: UFM for IMT-U7, UFM for IMT-U8 / U8 PSG, UFM for IMT-D3 / D5.
- Carbon cartridges: cartridge C for IMT-D3, cartridge C for IMT-D5.
What ultrafiltration does not remove
Notice: Ultrafiltration does not remove dissolved substances – pesticides, pharmaceuticals, hormones, heavy metals, nitrates or water hardness – and may not reliably capture the smallest nanoplastic particles. For these substances, membrane nanofiltration or reverse osmosis is suitable; for hard water, a water softener.
| Ultrafiltration unit comparison | |||
|---|---|---|---|
| Model | Installation | Flow rate | Suitable for |
| IMT-D3 | under sink, no electricity | 10 l/min | drinking water at the sink, cottage with low consumption |
| IMT-D5 | under sink, with display | 5 l/min | drinking water at the sink |
| IMT-U5 | main supply | 2 m³/h | house with lower consumption |
| IMT-U7 | main supply | 3 m³/h | family house, flat |
| IMT-U8 | main supply | 4 m³/h | larger houses, guesthouses, swimming pools |
| IMT-U8 PSG | main supply, automatic | 4 m³/h | larger buildings, water leak monitoring |
FREQUENTLY ASKED QUESTIONS
Everything you need to know about ultrafiltration
What is ultrafiltration and how does it work?
Ultrafiltration is mechanical membrane filtration with 0.01 µm pores. The membrane captures bacteria, viruses, sludge, algae and microplastics, while minerals such as calcium and magnesium stay in the water. Captured impurities are flushed from the membrane to the drain.
Will ultrafiltration replace a UV lamp?
Yes. A UV lamp only inactivates bacteria and viruses and their bodies remain in the water, whereas ultrafiltration physically removes them and also captures sludge and microplastics. There is no need to replace UV bulbs or check radiation intensity.
Does ultrafiltration need electricity?
The IMT-D3, IMT-U5, IMT-U7 and IMT-U8 models run on mains water pressure alone. Electricity is needed by the IMT-D5 (display) and the IMT-U8 PSG (automatic flushing and water leak monitoring).
Which ultrafiltration model should I choose for a family house?
For the whole house on the main supply, there are the IMT-U5 (lower consumption), IMT-U7 (typical family house), IMT-U8 (larger buildings) and the fully automatic IMT-U8 PSG. For drinking water at the sink, the IMT-D3 and IMT-D5 are suitable.
Do I need a special tap for under-sink ultrafiltration?
No. Both the IMT-D3 and IMT-D5 connect to your existing standard two-way tap, and filtered water flows from the regular spout.
How often do the membrane and cartridges need replacing?
The ultrafiltration membrane lasts up to 36 months, depending on the quality of the incoming water. On the IMT-D3 and IMT-D5 under-sink models, the carbon cartridge C is also replaced approximately every 12 months.
Is ultrafiltration suitable for well water?
Yes. We recommend fitting an IMT-M5 or IMT-M8 pressure regulator with pre-filter upstream of a whole-house unit to capture coarse impurities and extend membrane life. Depending on the water analysis, an iron and manganese filter or a nitrate filter can be added.
What is the IMT-P-W6 flushing valve for?
The IMT-P-W6 valve automatically flushes the membrane of the IMT-U7 and IMT-U8 units, so you do not have to take care of regular flushing yourself. The IMT-U8 PSG unit has built-in automatic flushing.
Does ultrafiltration remove pesticides, heavy metals or nanoplastics?
No. Ultrafiltration does not remove dissolved substances such as pesticides, nitrates or heavy metals and may not reliably capture the smallest nanoplastics. For these, membrane nanofiltration or reverse osmosis is suitable.
🔬 How ultrafiltration works: A membrane with 0.01 µm pores mechanically captures bacteria and viruses and leaves minerals in the water. Read more on the H2O nanotec blog: How to Remove Coliform Bacteria and E. coli from a Well.
Didn't find your answer? Ask us directly — we reply Mon–Thu 8 am–4 pm, Fri 8 am–2 pm (CET).
